Shanghai Liqi Rigging Co., LTD professional in research and development production of wire rope cable grip, steel wire rigging, wire rope rigging, power cable grip,towing grip, optical fibers grip, ground line grip, middle grip, protective grip , new line change to old line grip, etc., variety type completed, all the sizes can be customized, special sizes can be customized according to customer requirements or map.

Manufacturer sales directly,quality assurance,welcome to inquiry.

1 pcs also can be customized if you are willing to pay freight.

This products is made of mutifilament strands Stainless Steel Wire to weave,uniform grid high strength non-slip,press by copper bush with with the triangle circle,Submarine cable dedicated,corrosion resistance,strong breaking load is over 20 tons.

Notice:Cable is a bit long, the cable grip pull cable in the middle,there is no way to set from cable head to cable middle,it's waste time and laborious,now time we need wrapped grip,it like a cloth to wrapped in any part of the cable, we are free to lifting, pull, it can effectively save time and manpower.

All the materials of our cable grip contain hot galvanizing,304 stainless steel,316 stainless steel(Single strand,double strands and triangular loop)

1. put cable into grip first

2. Start the lacing from the 'eye' end or anchoring end of the cable grip

3. Thread the lace through the first two loops of Start the lacing from the 'eye' end or anchoring end of the cable grip.

4.Don't weave too tightly,there is should have the width of one half mesh between adjacent eyes.

5.Continue down the length of the cable grip.Try to maintain equal tension and equal spacing throughout as this leads to a more stable and equal grip (Try to achieve an even and neat lace-up as this assists with the strength of the grip when pulling)

6. inally, tie the ends of the lace once or twice round the end of the cable grip twisting the ends together securely. Excess lace can be cut off

7. Add any additional support as required –banding is recommended. The Slingco cable grip is now ready to use

This type use in submarine cable,corrosion resistance and strong breaking strength.

Cable sock is mesh structure, more drawing and more tightly,double eyes cable grip was used in towing, traction and lifting on the middle of cable,cable head is freely connect after wear out.

Please choose suitable sizes.

The use of the cable stock:

Trapping cable first, and then choose an employ or lifting tools holding the sock, now we achieved the goal of stringing,at same time,we also can use cable to hanging the sock,Cable sock is mesh structure, more drawing and more tightly,,it is easily wear in or take out the cable when push it to the object side.

This product was used to connect all kinds of aluminium conductor and insulation wire, ground wire, optical fiber, optical cable and cable when pay-off the line in power and communication line construction,it can pass all kinds of pay-off pulley as well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.

It's prefect tools in the field of electric power construction,communication lines, offshore oil field, wind power manufacturing, mobile company, electric power, railway, shipbuilding, cable, construction, steel, petrochemical,mechanical industry and so on.